User guide

9
Bluetooth Wireless Technology
Bluetooth Wireless Technology
3. Turn the Outerloop on, then hold
the Pair Button for 5 full seconds.
After you release the Pair button,
the blue LED should ash rapidly if
Outerloop is in Pairing Mode.
4. Outerloop will automatically pair
to the rst device it nds that is in
Pairing Mode. The next time you
pair to the same headset, you can
connect from Idle Mode instead of
Pairing Mode.
Pairing to a Headset with
Bluetooth Wireless Technology
When you're rst connecting to a
new device, you should be in an
environment with no other Bluetooth
wireless technology enabled devices
within range that might also be in
Pairing Mode.
1. Starting with the Power switch Off,
set the Phone/Headset switch to the
Headset position.
2. Following manufacturer’s
instructions, set your Headset to
Pairing Mode.