Instruction Manual

Bluetoth Wireless Technology
9
3. Press and hold the Pair button
on the Interloop while turning the
Power switch On. Hold for 5 full
seconds. After you release the Pair
button, the blue LED should ash
rapidly if Interloop is in Pairing
Mode.
4. Interloop will automatically pair to
the rst device it nds that is in
Pairing Mode. The next time you
pair to the same headset, you can
connect from Idle Mode instead of
Pairing Mode.
Pairing to a Headset with
Bluetooth Wireless Technology
When you're rst connecting to a
new device, you should be in an
environment with no other Bluetooth
wireless technology enabled devices
within range that might also be in
Pairing Mode.
1. Starting with the Power switch Off,
set the Phone/Headset switch to the
Headset position.
2. Following manufacturer’s
instructions, set your Headset to
Pairing Mode.
Bluetooth Wireless Technology
When Should I Release the Pair Button?
Idle Mode Pairing Mode Clear
Bluetooth LED
seconds