Owner's manual

Multi-Line Phone Hybrids
Connect the supplied cables as follows:
1. innkeeper 2: Line 1
1. INTERCHANGE (1) Line Out XLR to the HYBRID’S Send 1 input XLR.
2. INTERCHANGE (1) Line In XLR to the HYBRID’S Caller 1 output XLR.
3. Using the supplied 10 pin RJ50 cable, connect the INTERCHANGE (1)
Multi-Line Remote jack to the INNKEEPER 2 Remote control jack.
4. Connect INNKEEPER 2 Line 1 to an analog phone line or VoIP analog phone
line port.
2. innkeeper 2: Line 2
1. INTERCHANGE (2) Line Out XLR to the HYBRID’S Send 2 input XLR.
2. INTERCHANGE (2) Line In XLR to the HYBRID’S Caller 2 output XLR.
3. Using the supplied 10 pin RJ50 cable, connect the INTERCHANGE (1)
Single-Line Remote jack to the INTERCHANGE (2) Single-Line Remote
control jack.
4. Connect INNKEEPER 2 Line 2 to an analog phone line or VoIP analog phone
line port.
7
Getting Connected
Getting Connected
Remote Control
Line OutMix OutIntercom Line In
Single-Line Multi-Line
TM
JK Audio
Interchange
TM
PUSH PUSH
Remote Control
Line OutMix OutIntercom Line In
Single-Line Multi-Line
TM
JK Audio
Interchange
TM
PUSH PUSH
1
Remote
innkeeper 2 JK Audio, Inc.
Line
Line 2 Line 1
Line 1Line 2
Aux
Line Aux
Caller Send Caller Send Master
Send
PUSH PUSH PUSH
100 -240 VAC
50-60 Hz, 2.5 A
1
Remote
innkeeper 2 JK Audio, Inc.
Line
Line 2 Line 1
Line 1Line 2
Aux
Line Aux
Caller Send Caller Send Master
Send
PUSH PUSH PUSH
100 -240 VAC
50-60 Hz, 2.5 A
INNKEEPER 2
PHONE LINES
INTERCHANGE (1)
INTERCHANGE (2)
RJ-50
RJ-50