User Manual

9
Power
Connect the supplied cable to the mini USB Power jack
on the side of the unit to recharge the internal battery.
If the battery is almost fully discharged when the power
cable is connected the red LED on the side of the unit
will light steady to indicate the unit is receiving a slow
charge. Then the red LED will blink while the unit
receives a full charge before it resumes a steady light to
indicate a slow charge to complete the charge cycle.
If the power cable is connected when the unit is shut
down, the blue LED will remain on steady. If the power
cable is connected while the unit is in use, the blue LED
will flash to indicate the current connect mode as
described on pages 4-7.
BlueSet contains a rechargeable Lithium-Ion battery.
These batteries do not have a “charging memory” and
can be recharged at any time without changing their life
expectancy. All rechargeable batteries have a limited life
and will gradually lose their capacity to hold a charge.
This loss of capacity is irreversible. To get the most from
your BlueSet, the battery should not be allowed to fully
discharge. If this unit is not in use, the battery should be
recharged at least every 90 days. The Lithium-Ion
battery in this device is not user replaceable. Please
contact JK Audio or a factory authorized service center
for battery replacement.