User Manual

8
Power
Power On/Off
Pressing the Connect button will turn the BlueSet on.
To turn the power off, press and hold the Connect
button for a full five seconds. If left unused in Idle Mode
or if a live call is disconnected, BlueSet will automati-
cally disconnect Bluetooth in two minutes and power
will be turned off.
Power Up Sequence
When reconnecting to a device that is still in BlueSet’s
pairing history, the device that will be in Slave mode
should be powered up first. Then when the Master
device is turned on, it will find the Slave device during
its power up cycle.
When reconnecting to your cell phone, the switch on
BlueSet should be set to Phone and the BlueSet should
be turned on first.
When reconnecting to your Bluetooth headset, the
switch on BlueSet should be set to Headset and the
headset should be turned on first.
Disconnecting from a Bluetooth Device
To disconnect from any Bluetooth device, simply press
the Connect button and hold for 5 seconds. If left
unused in Idle Mode or if a live call is disconnected, the
BlueSet will automatically disconnect Bluetooth in two
minutes and power will be turned off.