User Manual

7
Bluetooth Wireless Technology
Connecting to a Bluetooth Headset
Set the Handset / Phone switch to the Headset position.
The first time you connect to a new headset, you should
be in a “quiet” environment with no other Bluetooth
enabled devices within range that might also be in
Pairing Mode. Following manufacturer’s instructions, set
your headset to Pairing Mode. Hold the Connect button
on BlueSet in for at least 5 full seconds to activate
Pairing Mode. BlueSet will automatically pair to the first
device it finds that is in Pairing Mode. The next time you
pair to the same headset, you can connect from Idle
Mode instead of pairing mode. Please see “Tech Notes”
on page 5 for more information about these modes.
Connection History
BlueSet retains the most recent 16 headset and 16
phone devices in memory. To clear either connection
history and return to factory reset, from the power-off
state set the switch to the Headset or Phone position,
then hold the Connect button in for at least 20 seconds.
After resetting, BlueSet will return to pairing mode.