User Manual

5
Bluetooth Wireless Technology
Enter “Yes” when asked to Bond with this device. Enter
the pin number as "0000".
When bonding is complete, the blue LED will flash at a
rate of 1 sec on, 2 sec off. Once BlueSet has been
added to your cell phone, subsequent connections can
be made more quickly from Idle Mode.
Tech Notes: There is a difference between “Pairing
Mode” and “Idle Mode”. The first time you connect
to a new device you must be in Pairing Mode.
When you hold the Bluetooth Connect button in for
about 2 seconds, the blue LED will begin to flash at
a rate of 200 ms on and 200 ms off. This first stage
is Idle Mode. Continue to hold the Connect button in
for another three seconds. After releasing the
Connect button, the LED flashes more rapidly,
about every 100 ms. This is Pairing Mode. You
must hold the Connect button in for a full 5 seconds
to reach Pairing Mode. Once in pairing mode, any
Bluetooth enabled device within range can pair with
BlueSet. After pairing is complete, the connection to
that device is secure.
The belt pack Mic/Talk button controls audio from the cell
phone into the intercom system.