User Manual

Bluetooth Wireless Technology

BlueSet will be activated when you press the Connect

button. The blue LED on the side of the unit will flash in

different sequences to indicate the current connection

status as described in the following sections.

Connecting to a Bluetooth Cell Phone

Set the Handset / Phone switch to the Phone position.

Establishing a Bluetooth connection varies with different

cell phones. On your phone, find and select the option to

set up a connection. Press and hold the brown Connect

button on BlueSet for at least 5 full seconds. After you

release the Connect button, the blue LED should flash

rapidly if BlueSet is in Pairing Mode.

Now go to your phone and search for Bluetooth devices.

If this is the first time you have paired with this device,

select the option to add an audio device. When the cell

phone has found the new device, select from the list the

device ID of "JKBSETgpxxxx" where:

g = XLR gender

p = XLR pin count

xxxx = last four digits of serial number