Manual

4
Broadcast Host™ Broadcast Field Mixer
Getting to Know Your Broadcast Host
Inputs & Outputs
1. Line Jack
Connect to a standard, single line, analog telephone line.
2. Phone Jack
Connect a single line analog telephone for call setup, dialing, or call
screening. (Optional).
3. Auto-Answer
This switch enables Broadcast Host to automatically answer an incoming
call and then disconnect after the caller hangs up. Auto answer will occur on
the rst ring.
4. Caller Output
Male balanced XLR output contains only the caller’s voice.
5. Send 1 Input
Female balanced XLR input for signals going out to the phone line. Mic or
line level input.
6. Mic / Line switch
7. Sets the front end sensitivity of the Send 1 XLR jack. Set to Mic if you intend
to connect a dynamic microphone directly to the Send 1 jack. Set to Line if
you are connecting to the output of a mic mixer.
3 4 5 6 1097 81 2