Instructions / Assembly
10
NBTseries Acidic Condensate pH Treatment Kits –– Installation/Operation & Maintenance
Inspect frequently
Installer — Instruct the building owner to
frequently inspect the NBT-23 and NBT-
24-P tank neutralizer and all condensate
noticed.
Recharge as required
When pH tank outlet falls below 5PH. Lo-
check with local authority.
At least at a minimum once a year.
Cleaning
Maintenance
Environmentally Friendly
environment and can be disposed of as normal refuge. Do not allow children or ani-
mals to consume pH power pellets as they are not meant as a neutralizer for human or
animal consumption.
Important
Remove pellets from plastic shipping bag before placing in the NBT-23 tank.
SDS sheet is included with the NBT-23 units or can be found on the JJM Boiler Works, Inc. website @ www.jjmboilerworks.com
If you have our model NBT-24-P
1. Pellets can be replaced by removing the blue cover and pump. Either vacuum the pellets out with a wet vacuum or hand empty
into a pail.
2.
Figure 13 NBT-24-P Wiring Diagram
NBT-24-P Wiring
BLK
CUSTOMERS
120VAC
POWER
CONNECTION.
BRING POWER
AND CONNECT IN
SWITCH BOX.
CONNECT TO
15AMP CB
FIELD WIRING
FACTORY WIRING
BLK
WHT
GRN
PHASE
NEUTRAL
GROUND
FLOAT
SWITCH
BLK
BLK
PUMP 1
Receptacle
MD600 Condensate Pump
Low Voltage
High Water Cutoff
D:\6_praca\firmy\YourSpreadsheets\_ icons and history\YS logo.jpg
SGNA
01/08/18----NBT-24-P Wiring
NBT-24-P Wiring
JJM BOILER WORKS INC.
BLK
CUSTOMERS
120VAC
POWER
CONNECTION.
BRING POWER
AND CONNECT IN
SWITCH BOX.
CONNECT TO
15AMP CB
FIELD WIRING
FACTORY WIRING
BLK
WHT
GRN
PHASE
NEUTRAL
GROUND
FLOAT
SWITCH
BLK
BLK
PUMP 1
Receptacle
MD600 Condensate Pump
Low Voltage
High Water Cutoff
D:\6_praca\firmy\YourSpreadsheets\_ icons and history\YS logo.jpg
SGNA
01/08/18----NBT-24-P Wiring
NBT-24-P Wiring
JJM BOILER WORKS INC.
e pellet chambers of the NBT-23
and NBT-24-P should at minimum
be clean out once a year or when the
pH level at the outlet port falls below
5.0 pH. is is best done with a wet
vacuum. Rell chamber with new pH
Power Pellets® by JJM.
Contact your local wholesaler or
manufacturer’s representative for
replacement parts.
Dealer listing at www.jjmboilerworks.com