335w Silver Poly Manual

- 15 -
Figure 6 above: PV module installed at short side with Clamp fitting method
Module type
Cell type
Cell
quantity
Dimension(mm)
A*B
J
K
Frame
Group 1
6 inch Poly
6*12
1956*992 & 1979*1002
50
240
40*35 & 35*35
Group 5
6 inch Mono
6*12
1956*992 & 1979*1002
50
240
40*35 & 35*35
Group 3
6 inch Poly
6*10
1650*992 & 1665*1002
50
240
40*35
Group 7
6 inch Mono
6*10
1650*992 &1665*1002
50
240
40*35
Table 5 above: Mechanical dimensions when modules installed at short side with Clamp fitting method
2)Half-cut
Figure 7 above: PV module installed at short side with Clamp fitting method
Module
type
Cell type
Cell
quantity
Dimension(mm)
A*B
J
K
Frame
Group 2
6 inch Poly
6*24
1987*992 & 2000*992 & 2008*1002
50
240
40*35 & 35*35
Group 4
6 inch Poly
6*20
1665*992 & 1684*1002
50
240
40*35 & 35*35
Group 6
6 inch Mono
6*24
1987*992 & 2000*992 & 2008*1002
50
240
40*35
Group 8
6 inch Mono
6*20
1665*992 & 1684*1002
50
240
40*35
Table 6 above: Mechanical dimensions when modules installed at short side with Clamp fitting method
2.3.4 Fixation with clamps at the long & short sides（this method has not been UL 1703
certified
）
When installing modules using clamps on the long side & short side of the frame, the
products in Table 7 & 8 the clamp in Table 3 & 4 are applicable.The fixation with clamps at
long & short sides of the frames can‟t be used unless the fixation is UL certified with Jinko
modules.
The considerations and requirements for mounting with clamps, please refer to the
instructions in 2.3.2, and find detailed mounting information in the below illustration as Figure