335w Silver Poly Manual

- 14 -

Clamp type

Dimension

Composition material

Fringe Clamp(40 mm thickness)

39 x 50 x 42 mm

Aluminum-alloy

Fringe Clamp(35 mm thickness)

41.5 x 50 x 40 mm

Middle Clamp

42 x 50 x 28 mm

Table 3 above: The specification & material of clamp

Clamp type

Dimension(mm)

Middle Clamp

13.5

0.5~2

2.5

Table 4 above: Mechanical dimensions when modules installed with mid Clamp

2.3.3 Fixation with clamps at short sides of the frames (this method has not been UL

1703 certified)

When installing modules using clamps on the short side of the frame, the products in Table 5

& 6 the clamp in Table 3 & 4 are applicable.The fixation with clamps at short sides of the

frames can‟t be used unless the fixation is UL certified with Jinko modules.

The considerations and requirements for mounting with clamps, please refer to the

instructions in 2.3.2, and find detailed mounting information in the below Figure 6 & 7. The

mounting place distance is suggested bigger than J and less than K, as shown below.

1)Normal PV module