Operation Instructions

5）AsshowninFigure7,thestandardfront‐wheel stand is fixed under the front
wheel of the bike to reduce the left and right wing of the front wheel and improve
thecomfortwhileriding.
Note:
 If you are not familiar with the correct operation of disassembling the rear
wheel of the bike, please consult the bike shop nearby or refer to your bike
instructions;
 If you fail to master the correct operation of bike installation on the bike trainer,
please consult the professional bike mainte nance personnel nearby or directly
contact the UNISKY Dealer;
 Before riding, please make sure that your bike has been installed properly, or it
will fall off from the bike trainer due to the unstable fixation between the bike
and the bike trainer, resulting in acc idental injury and property loss;
 Ensure that the bike trainer is placed flat to avoid accidental injury caused by
shaking during riding;
 Before getting on the bike, it is necessary to check the air pressure of the tire.
The air pressure while riding shall be in accordance with the value indicated on
the tire;
 Whether it's a road bike or mountain bike, it's strongly recommended to use
slicks for riding training, especially for mountain bikes. Mountain bikes are with
bulky tire patterns, which will cause serious tire noise during riding training
and affect the rider’s mood and fun of riding.