User Manual
------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------
--------
Before using TOYDIY, you must read the safety instructions on the
next page. We are not responsible for any personal damage caused by
violation operation and disobey the safety instruction when using TOYDIY.
Warning: The FDM Toolhead and FDM-Dual Toolhead contain heating
elements. Do not touch the nozzle directly by your hands to avoid scald.
After printing, let TOYDIY cool down to indoor temperature before
cleaning.
Warning: Laser Toolhead contains Laser device. Make sure you wear
Safety Glasses when using it. Do not observe the laser directly without
Safety Glasses.
Warning: CNC Toolhead contains high-speed motor, violation operation
may cause damage to graver, make sure you wear Safety Glasses when
using it.
Warning: Never leave the TOYDIY unattended while operating – always
stay within sight. Look at it frequently.
Warning: When inspecting the TOYDIY, please plug out it at first, and
make sure it has been powered off before checking.
Warning: Do not move the axis by hand directly , otherwise the driver
chip on the motherboard will be burnt.
'
=KRIUSKZUINUUYK+I[H3GQKX
Ｄｉｓｃｌａｉｍｅｒ