USR-W610 User Manual Technical Support: h.usriot.com USR-W610 User Manual File Version: V1.0.1.
USR-W610 User Manual Contents Technical Support: h.usriot.com USR-W610 User Manual........................................................................................................................................ 1 Features....................................................................................................................................................................... 4 1.Get Start...................................................................................................
USR-W610 User Manual Technical Support: h.usriot.com 4.2.AT command.............................................................................................................................................. 17 4.2.1.Serial AT command mode............................................................................................................ 17 4.2.2.Setup software............................................................................................................................... 17 4.2.3.
Features USR-W610 User Manual Technical Support: h.usriot.com Support WIFI@2.4GHz 802.11b/g/n wireless standards. Support TCP Server/TCP Client/UDP Server/UDP Client/HTTP Client mode. Support AP, STA, AP+STA. Support RS232 and RS485 serial ports. Support electrostatic protection. Support identity packet function. Support heartbeat packet function. Support Websocket function. Support timeout reset function, timing reset function.
USR-W610 User Manual 1.Get Start Technical Support: h.usriot.com 1.1.Application Diagram Figure 1 Application diagram 1.2.Hardware 1.2.1.LED LED Description Power Power LED will light after powering the module successfully Work Work LED will blink every two seconds if module works normally.
1.2.2.Interface USR-W610 User Manual Technical Support: h.usriot.com Figure 3 Interface 1.2.3.Dimension Figure 4 Dimension Jinan USR IOT Technology Limited 6 www.usriot.
2.Networking application USR-W610 User Manual Technical Support: h.usriot.com USR-W610 supports two wireless interface: one STA interface and one AP interface. And W610 also supports one 100M Ethernet interface. AP: Access point, central node of a wireless network. In general, wireless router is an AP and other wireless terminal can connect to each others through AP. STA: Station, terminal of a wireless network. Such as PDA, mobile phone. 2.1.
USR-W610 User Manual Technical Support: h.usriot.com Figure 7 AP+STA mode 2.1.4.AP, STA application User can configure two W610 one as AP and another as STA, then connect W610 in STA mode to W610 in AP mode to realize AP, STA application. Figure 8 AP, STA application 2.1.5.Encryption mode Encryption can make sure secure data transmission and improve communication security.
USR-W610 User Manual Technical Support: h.usriot.com all devices will be distributed a IP in same network segment with W610. Application diagram as follow: Figure 9 AP+LAN application 2.2.2.AP+WAN User can configure W610 in AP mode and Ethernet interface in WAN interface(enable DHCP) to connect to internet. In this mode, W610 can work as second grade router and other STA device can connect to W610 AP interface to access internet.
USR-W610 User Manual Technical Support: h.usriot.com communicate to each other without limitation. If user want to achieve communicate between W610 to other devices, user need set LAN interface IP address of W610 into same network segment as AP. Application diagram as follow: Figure 12 Bridge mode Jinan USR IOT Technology Limited 10 www.usriot.
3.Product Functions USR-W610 User Manual Technical Support: h.usriot.com 3.1.Work mode W610 supports five work modes: transparent transmission mode, serial port command mode, HTTP Client mode, Modbus TCP<=>Modbus RTU mode and AT command mode. Default work mode of module is transparent transmission mode. User can switch module between transparent transmission mode, serial port command mode, HTTP Client mode and Modbus TCP<=>Modbus RTU mode by Web Server or AT command.
USR-W610 User Manual 3.1.2.Serial port command mode Technical Support: h.usriot.com In this mode, W610 should works in UDP Client mode or TCP Client mode and user can send data in specified protocol format to different server without resetting. If user send serial data in specified protocol format from serial device to W610, W610 will parse the data and send data after parsing to appointed server if data format is correct; if data isn’t in correct format, W610 won’t send to server side.
Technical Support: h.usriot.com USR-W610 User Manual Figure 15 Modbus TCP<=>Modbus RTU mode 3.1.5.AT command mode User can enter AT command mode and send AT commands by serial to query/set W610 parameters(Enter AT command mode will disable transparent transmission mode and make serial port to send/receive AT commands). In this mode, all settings will be saved automatically and module will enter transparent transmission mode after sending AT+ENTM to exit AT command mode. 3.2.Serial port 3.2.1.
USR-W610 User Manual 3.2.4.Baud rate synchronization function Technical Support: h.usriot.com When module works with USR devices or software, serial parameters will change dynamically according to network protocol. User can modify serial parameters by sending data conformed to specific protocol via network. It is temporary, after resetting module, the parameters will back to original parameters. 3.3.Features 3.3.1.
USR-W610 User Manual Technical Support: h.usriot.com Figure 19 Identity packet application diagram When W610 works in TCP Client mode, user can enable identity packet function. Identity packet is used for identifying the device when module works as TCP client. There are two methods to send identity packet. Identity packet will be sent after connection is established. Identity packet will be added on the front of every data package.
3.3.4.Keep-Alive function USR-W610 User Manual Technical Support: h.usriot.com W610 supports Keep-Alive function of TCP connection. W610 will disconnect to network when network connection exceptions occur and will also reconnect to server after network connection restoring. 3.3.5.Heartbeat packet function Heartbeat packet: In transparent transmission mode, module can output heartbeat packet to serial side or network side periodic.
4.Parameter configuration USR-W610 User Manual Technical Support: h.usriot.com There are two ways to configure USR-W610. They are Web Server and AT command. 4.1.Web Server User can connect PC to W610 through AP interface and enter Web Server to configure. Web Server default parameters as follows: Parameter Default settings Username admin SSID Web Server IP address Password USR-W610_xxxx(4 bytes MAC address) 10.10.100.
5.Contact Us USR-W610 User Manual Technical Support: h.usriot.com Company: Jinan USR IOT Technology Limited Address: Floor 11, Building 1, No. 1166 Xinluo Street, Gaoxin District, Jinan, Shandong, 250101, China Web: www.usriot.com Support: h.usriot.com Email: sales@usr.cn Tel: 86-531-88826739/86-531-55507297 6.
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
