User's Manual

USR-G786-G User Manual Technical Support: h.usriot.com
Jinan USR IOT Technology Limited www.usriot.com
51
 Format
AT+Z{CR}
{CR}{LF}OK{CR}{LF}
7.2.4.AT+E
Function：Query/set the echo status of AT commands.
Format:
 Query current parameter：
AT+E{CR} or AT+E?{CR}
{CR}{LF}+E:status{CR}{LF}
 Setting：
AT+E=status{CR}
{CR}{LF}OK{CR}{LF}
 Parameter：
 status：echo status，including:
ON：open
OFF：close
Command echo default is on.
 E.g：AT+E=ON
7.2.5.AT+ENTM
 Function: set the device to return to the previous working mode.
 Format：
 Perform specified function：
AT+ENTM{CR}
{CR}{LF}OK{CR}{LF}
7.2.6.AT+WKMOD
 Function：Query/Setting module’s work mode
 Format:

Query current parameter:
AT+WKMOD{CR} or AT+WKMOD?{CR}
{CR}{LF}+WKMOD:mode{CR}{LF}
 Setting：
AT+WKMOD=mode{CR}
{CR}{LF}OK{CR}{LF}
 Parameter:
 mode：work mode，including:
NET： Network transparent mode
HTTPD: HTTPD Client mode
SMS：SMS mode
Default in NET mode:
 E.g：AT+WKMOD=NET