User's Manual

USR-G786-G User Manual Technical Support: h.usriot.com
Jinan USR IOT Technology Limited www.usriot.com
49
AT
Test Command
H
Help information
Z
Module reboot
E
Query/set whether to enable command
echo
ENTM
Exit AT command mode
WKMOD
Query/set work mode
CMDPW
Query/set command password
STMSG
Query/set module start information
RSTIM
Query/set the time of equipment automatically restart
CSQ
Query signal strength information of device currently
SYSINFO
Query network information of device
UCPIN
Query/set PIN code
Query/set query commands
RELD
Restore to the user default settings
CLEAR
Restore original factory
s
ettings
CFGTF
Save current settings to default settings
Query/set information query commands
VER
Query version information
SN
Query SN code
ICCID
Query ICCID code
IMEI
Query IMEI code
CIP
Query IP address
LBS
Query base station positioning
information
CCLK
Query current time
PING
Query the network status
Serial parameter commands
UART
Query / set the parameters of serial ports
CMDPT
Query/set network data output serial port
UARTFT
Query/set serial port package time
UARTFL
Query/set the serial port package length
Network commands
APN
Query/set APN information
SOCKA
Query/set socket A parameter
SOCKB
Query/set socket B parameter
SOCKAEN
Query/setup whether to enable socket A
SOCKBEN
Query/setup whether to enable socket B
SOCKALK
Query socket A connection status
SOCKBLK
Query socket B connection status
SOCKATO
Query/set reconnect time after disconnection of socket A
SOCKBTO
Query/set reconnect time after disconnection of socket B
SOCKRSTM
Query/Set the max number of reconnect when socket connection
failure