User's Manual
Table Of Contents
- USR-G809 User Manual
- 1.Introduction
- 1.1.Overview
- 1.2.Features
- 1.3.Specification
- 1.4.Interface
- 1.5.Indicator
- 1.6.Dimensions
- 2.General Function
- 2.1.Web Interface
- 2.2.Hostname
- 2.3.User Password Settings
- 2.4.Reboot Timer
- 2.6.Reboot
- 2.7.Reload Button
- 3.Interface
- 3.1.WAN Interface
- 3.2.LAN Interface
- 3.3.Cellular Network Interface
- 3.4.WLAN Interface
- 3.5.VLAN
- 3.6.DIDO
- 4.Network
- 4.1.Network Switch
- 4.2.DHCP
- 4.3.Hostnames
- 4.4.Static Routes
- 4.5.Diagnostics
- 5.VPN
- 5.1.PPTP Client
- 5.2.L2TP Client
- 5.3.IPSec
- 5.4.OpenVPN
- 5.5.GRE
- 6.Firewall
- 6.1.General Settings
- 6.2.NAT
- 6.3.Traffic Rules
- 6.4.Access Restriction
- 7.Serial Port
- 7.1.Connecting Hardware
- 7.2.Serial Port Settings
- 7.3.Operation Mode
- 7.4.General Function
- Protocol description:
- 8.USR Cloud
- 8.1.Cloud Monitor
- 8.2.Add device
- 8.3.Network Status
- 8.4.Parameter Configuration
- 8.5.Firmware Upgrade
- 8.6.Records of device
- 8.7.Alarm
- 8.8.Remote Configuration
- 9.Services
- 9.1.Syslog
- 9.2.NTP
- 9.3.Email
- 9.4.SMS
- 9.5.Alert
- 9.6.Alert Examples
- 9.7.Call Reboot
- 9.8.Geolocation
- 9.9.DDNS
- 10.AT Commands Settings
USR-G809 User Manual Technical Support:
h.usriot.com
Jinan USR IOT Technology Limited www.pusr.com
37
Item
Description
Default
Interface
wan_4G, wan_wired or auto
auto
Remote VPN Endpoint
VPN Client/Server, remote endpoint IP/domain
192.168.0.2
Mode
Main, aggressive
main
Tunnel type
Site to site, site to host, host to host, host to site
Site to site
Local subnet
IPSec local subnet and mask
192.168.1.0/24
Remote subnet
IPSec remote subnet and mask
192.168.55.0/24
Local Identifier
IP address or FQDN preceded by @, e.g. @domain
@client
Peer Identifier
IP address or FQDN preceded by @, e.g. @domain
@server
IKE Encryption
Phase 1 IKE encryption algorithm, authentication
and DH group settings.
3DES/MD5/Group2
IKE Lifetime
Set the lifetime in IKE negotiation, 400~86400s
28800
Authentication Method
Pre-shared key
PSK
ESP encryption
3DES/AES-128/AES-192/AES-256
AES-128
ESP Authentication
SHA-1/SHA2-256/MD5
SHA-1
ESP Lifetime
Set the ESP lifetime/s
3600
PFS Group
None/DH1/DH2/DH5
DH2
DPD Interval
Set the interval after which DPD is triggered if no
IPsec protected packets is received from the peer/s
60
DPD Timeout
Set the timeout of DPD packets/s
60
DPD Action
Sets the action for connection detection,
None/Clear/Hold/Restart
Restart
After connected successfully, we can check the connection status in “VPN - VPN Status”.
5.4. OpenVPN