User's Manual
Table Of Contents
- USR-G809 User Manual
- 1.Introduction
- 1.1.Overview
- 1.2.Features
- 1.3.Specification
- 1.4.Interface
- 1.5.Indicator
- 1.6.Dimensions
- 2.General Function
- 2.1.Web Interface
- 2.2.Hostname
- 2.3.User Password Settings
- 2.4.Reboot Timer
- 2.6.Reboot
- 2.7.Reload Button
- 3.Interface
- 3.1.WAN Interface
- 3.2.LAN Interface
- 3.3.Cellular Network Interface
- 3.4.WLAN Interface
- 3.5.VLAN
- 3.6.DIDO
- 4.Network
- 4.1.Network Switch
- 4.2.DHCP
- 4.3.Hostnames
- 4.4.Static Routes
- 4.5.Diagnostics
- 5.VPN
- 5.1.PPTP Client
- 5.2.L2TP Client
- 5.3.IPSec
- 5.4.OpenVPN
- 5.5.GRE
- 6.Firewall
- 6.1.General Settings
- 6.2.NAT
- 6.3.Traffic Rules
- 6.4.Access Restriction
- 7.Serial Port
- 7.1.Connecting Hardware
- 7.2.Serial Port Settings
- 7.3.Operation Mode
- 7.4.General Function
- Protocol description:
- 8.USR Cloud
- 8.1.Cloud Monitor
- 8.2.Add device
- 8.3.Network Status
- 8.4.Parameter Configuration
- 8.5.Firmware Upgrade
- 8.6.Records of device
- 8.7.Alarm
- 8.8.Remote Configuration
- 9.Services
- 9.1.Syslog
- 9.2.NTP
- 9.3.Email
- 9.4.SMS
- 9.5.Alert
- 9.6.Alert Examples
- 9.7.Call Reboot
- 9.8.Geolocation
- 9.9.DDNS
- 10.AT Commands Settings
USR-G809 User Manual Technical Support:
h.usriot.com
Jinan USR IOT Technology Limited www.pusr.com
36
Item
Description
Default
Server address
VPN server address or domain name
192.168.0.2
Interface
wan_4G, wan_wired or auto
auto
Username/Password
Get from the VPN server
Null
Encryption/Authenticati
on
Tunnel password, MPPE, IPSEC, consistent with the
VPN server.
MPPE
Enable Static Tunnel IP
Address
When it is disabled, VPN server will assign an IP
address dynamically.
Disable
Extra Options
Append pppd parameters, magic number.
Null
NAT
The source IP address of host behind G809 will be
disguised before accessing the remote address.
Enable
Remote Subnet/Mask
When NAT is enabled, can achieve the subnet
communication under VPN.
192.168.55.0/255.255.2
55.0
Enable ping
Real-time VPN online detection and reconnection
mechanism.
Disable
After connecting to L2TP server, we can check the connection status in “VPN Status”.
5.3. IPSec
Descriptions: