User's Manual
Table Of Contents
- USR-G809 User Manual
- 1.Introduction
- 1.1.Overview
- 1.2.Features
- 1.3.Specification
- 1.4.Interface
- 1.5.Indicator
- 1.6.Dimensions
- 2.General Function
- 2.1.Web Interface
- 2.2.Hostname
- 2.3.User Password Settings
- 2.4.Reboot Timer
- 2.6.Reboot
- 2.7.Reload Button
- 3.Interface
- 3.1.WAN Interface
- 3.2.LAN Interface
- 3.3.Cellular Network Interface
- 3.4.WLAN Interface
- 3.5.VLAN
- 3.6.DIDO
- 4.Network
- 4.1.Network Switch
- 4.2.DHCP
- 4.3.Hostnames
- 4.4.Static Routes
- 4.5.Diagnostics
- 5.VPN
- 5.1.PPTP Client
- 5.2.L2TP Client
- 5.3.IPSec
- 5.4.OpenVPN
- 5.5.GRE
- 6.Firewall
- 6.1.General Settings
- 6.2.NAT
- 6.3.Traffic Rules
- 6.4.Access Restriction
- 7.Serial Port
- 7.1.Connecting Hardware
- 7.2.Serial Port Settings
- 7.3.Operation Mode
- 7.4.General Function
- Protocol description:
- 8.USR Cloud
- 8.1.Cloud Monitor
- 8.2.Add device
- 8.3.Network Status
- 8.4.Parameter Configuration
- 8.5.Firmware Upgrade
- 8.6.Records of device
- 8.7.Alarm
- 8.8.Remote Configuration
- 9.Services
- 9.1.Syslog
- 9.2.NTP
- 9.3.Email
- 9.4.SMS
- 9.5.Alert
- 9.6.Alert Examples
- 9.7.Call Reboot
- 9.8.Geolocation
- 9.9.DDNS
- 10.AT Commands Settings
USR-G809 User Manual Technical Support:
h.usriot.com
Jinan USR IOT Technology Limited www.pusr.com
27
Hold time (Unit: s)
Duration of the DO action, only valid in “High” and
“Low” of the alert triggered action. 0 means until the
next action, and other values represent the duration
of the DO action (0~255s can be set).
0
Low level width(Units: s)
Valid when the alert triggered action is “Pulse”, the
low level duration of this DO action can be set to
0~30000ms.
1000
High level width(Unit: s)
Valid when the alert triggered action is “Pulse”, the
high level duration of this DO action can be set to
0~30000ms.
1000
Alert source
DI1 or DI2 which triggers the action of this DO.
DI1
Note: The maximum voltage of DO is 36V, overcurrent protection is 300mA.
3.7. User-defined Indicator
Users can define the “USR” indicator according to the requirements.
Item
Description
Default
Enable
Enable/Disable
Disable
Event
SOCKA~D、pptp、l2tp、gre、openvpn、ipsec
SOCKA
Note:
SOCK: The light will be on when socket connection is established.
VPN: The light will be on when the VPN connection is established, only valid in Client mode(IPSEC).
TCPS: On when connecting to the clients.
TCPC/HTTPD: On when connecting to the server.
UDPC/UDPS: On when the socket connection is established.