User's Manual
Table Of Contents
- USR-G809 User Manual
- 1.Introduction
- 1.1.Overview
- 1.2.Features
- 1.3.Specification
- 1.4.Interface
- 1.5.Indicator
- 1.6.Dimensions
- 2.General Function
- 2.1.Web Interface
- 2.2.Hostname
- 2.3.User Password Settings
- 2.4.Reboot Timer
- 2.6.Reboot
- 2.7.Reload Button
- 3.Interface
- 3.1.WAN Interface
- 3.2.LAN Interface
- 3.3.Cellular Network Interface
- 3.4.WLAN Interface
- 3.5.VLAN
- 3.6.DIDO
- 4.Network
- 4.1.Network Switch
- 4.2.DHCP
- 4.3.Hostnames
- 4.4.Static Routes
- 4.5.Diagnostics
- 5.VPN
- 5.1.PPTP Client
- 5.2.L2TP Client
- 5.3.IPSec
- 5.4.OpenVPN
- 5.5.GRE
- 6.Firewall
- 6.1.General Settings
- 6.2.NAT
- 6.3.Traffic Rules
- 6.4.Access Restriction
- 7.Serial Port
- 7.1.Connecting Hardware
- 7.2.Serial Port Settings
- 7.3.Operation Mode
- 7.4.General Function
- Protocol description:
- 8.USR Cloud
- 8.1.Cloud Monitor
- 8.2.Add device
- 8.3.Network Status
- 8.4.Parameter Configuration
- 8.5.Firmware Upgrade
- 8.6.Records of device
- 8.7.Alarm
- 8.8.Remote Configuration
- 9.Services
- 9.1.Syslog
- 9.2.NTP
- 9.3.Email
- 9.4.SMS
- 9.5.Alert
- 9.6.Alert Examples
- 9.7.Call Reboot
- 9.8.Geolocation
- 9.9.DDNS
- 10.AT Commands Settings
USR-G809 User Manual Technical Support:
h.usriot.com
Jinan USR IOT Technology Limited www.pusr.com
21
The maximum WiFi range is 100m in the open area, and within 40m in the office with obstacles.
Item
Description
Default
ESSID
Network name of the WiFi, can be modified.
USR-G809-8899
(8899=the last 4 bits of the
MAC)
Mode
Access Point
AP
Hide ESSID
Enable: None of client could scan the SSID. If
you want to connect to the router AP, must
enter the ESSID at WiFi client side manually.
Disable: Enable the SSID broadcasting. So that
the client can scan the SSID.
Disable
Encryption
WPA2-PSK/WPA-PSK/No Encryption
WPA2-PSK
Cipher
CCMP/TKIP/CCMP&TKIP
CCMP
Key
WiFi password, can be modified.
www.pusr.com
Radio Enable/Disable
Enable: open WiFi radio, AP can be used.
Disable: close WiFi radio, AP cannot be used,
“WLAN” indicator light will be off.
Enable
Network Mode
802.11b/g/n
802.11b/g/n
Channel
Auto, can be selected.
Auto
Bandwidth
40MHz/20MHz
40MHz
Regions
Optional
none
Channel
Optional
CH1~11
In “WLAN---General Settings”, we can change the SSID and password.