User's Manual

EnglishROCK BT-30W weatherproof Bluetooth®/Mic/FM/Guitar Speaker

5. Using your Rock BT
5.1- Connection and activation

Fig.1Fiig.2
● ConnectthesuppliedACcabletothespeakerasFig.1
● PlugtheACcordintothewalloutletasFig.1
● Pressthepowerswitch(17)toONpositiontoactivateyourRockBT.
asfig.2
● Pressandholdsourcekey(15)asFig.3untilthecolorringaround
mastervolume(10)flashesandatonebeatbeingheard.
Fig.3
5.2- Charging the battery
● ByconnectingACpowerorexternalDC12VtoJack(19),batterywillstartcharging
● WhenbatterygotolowleveltheRedLEDlight(7)willstartflashing
●WhenfullychargetheRedLEDlightturnoff.
5.3- Bluetooth pairing
Manual Bluetooth pairing
● PleasemakesureyourBluetoothdeviceandyourspeakerareinrange(approximately3feet).
● SelecttheBluetoothmodeviatheSourceselectionkey(15)
● TheblueLED(6)willflashandBLUElettershownonthedisplay(4).
● Entersearchmodeonyourdevice.Oncedetected,thenameoftheBluetooth“ROCKBT”willappear
onyourdevice.
● Oncepairedandconnected,theblueLED(6)stopflashingandremainlit.

5.4- Connection using AUX input
● UseastereoaudiocabletoconnectyourdevicetotheAUX(1)jackinputtoyourROCKBT
● Oncethecablebeingplugbecomespriority(undernoUSBplay)toplayfilesfromyourdevice

5.5- Radio operation
Select stations
●Usethesourceselectionkey(15)toselectFMmode,Theradiofrequencywillbedisplayedon
display(4)
● Usetheand key(5)tosearchforstations.