Installation Guide

Install Plug
Please buy a suitable plug to connect the wire, one of which is ground wire. if you don't
need it, you can leave it alone, but please pay attention to the safety of using idle lines.
3.
Test:
After the installation is completed, please test whether the LED light can be normally used. If
not, please check whether the plug wire is successfully installed. Lights up with short press
means installation is successful. If there is any problem, please contact the customer service.
4.
LIVE
EARTH
NEUTRAL
Live supply-Red or brown Earth
supply-Green/yellow Neutral
supply-Black or blue
Live-brown
Earth Green
& yellow
Neutral-blue
The product's touch switch mode:
Single button 1, first short press, the light is on with cold white color;
Second short press for neutral light;
Third short press is warm light; Short press again, the power is off.
Long press in the light state can adjust the brightness.
5.