Installation Guide

1.Press on the touch switch for a short time to
control the light on or off .(Note: The defogging
is turned on or off with mirror light)
2. After the light is turned on, press the touch
switch for a long time to adjust the brightness
of the light.
3. Stop whenever you think the brightness is
OK for you.
For the LED Light:
1. Turn on the power.
2. Open your phone Bluetooth search for ‘mirror multimedia’,
select and connection.
3. Then you can play any music within your phone/pad.
NOTE: Bluetooth is connectable to one device only. If you
want to connect the second device, please foget the first
device.
For Bluetooth Music：
900
AC110V-120V
60W
Ra>90