Manual

W
e strongly advise that you familiarize yourself with all the
mechanism of this, or any gun before putting ammunition into it.
•
Pistol will fire with magazine removed.
• Removing magazine will not unload the cartridge from the
chamber. Always check chamber after removing magazine.
• Never carry with a cartridge in the chamber.
• Always keep safety on until pistol is pointed at a safe target
a
nd you intend to fire.
• Keep chamber empty & safety on to avoid accidental dis-
charge if dropped or if trigger is accidentally pulled.
• Protect your hearing & sight by wearing shooting glasses &
hearing protection
SAFETY: The word “FIRE” is visible when pistol is in firing
condition. Moving the safety upwards, the word “SAFE” is visible.
When the pistol is in safe position a cartridge cannot be chamber
and the trigger is inoperative.
LOADING THE PISTOL: After loading your Magazine, insert it into
the bottom of the pistol handle and push it into the pistol as far as
possible. When fully inserted, the Magazine Catch will hook over the
bottom of the Magazine and hold it in its proper position. Take the
pistol in one hand with a firm grip, making sure your fingers are not
touching the trigger.
Point Your Pistol in a Safe Direction, then
place safety into the fire position pull the slide as far as rearward as
it will go. Release the Slide allowing it to go forward of its own
accord. This procedure places the first cartridge into the chamber
and the gun is ready for firing. Subsequent feeding and ejection
operations are performed automatically until the pistol is empty.
UNLOADING WITHOUT FIRING: Always point your pistol in a safe
direction. To unload unfired cartridges move the safety upwards
into safe position then move the Magazine Catch rearward until
the Magazine can be pulled from the pistol. After
the magazine is removed, pull the Slide to the rear to remove the
cartridge from the Barrel chamber. Always check the Barrel
chamber visually for cartridges by holding the Slide back and
looking into the Slide. Chamber and Magazine cavities.
DISASSEMBLY AND CLEANING: The pistol must be in
unloaded, uncocked condition before take down can be
performed.
To remove the Slide use a blunt object to push the take
down button, located at the backend of the Slide, forward until it
stops (about 1/8 inch). While holding the take down button
depressed, gently lift the Slide away from the Frame until it stops.
Release the take down button gently as it is spring loaded. Hold the
rear of the Slide up and push the Slide forward, off of the end of the
gun. This procedure removes the entire Slide Assembly and is
sufficient for normal cleaning and oiling. Clean the Barrel and the
entire pistol to remove powder residue then apply a light oil to all of
the internal surfaces including the Magazine and the barrel bore.
ASSEMBLY: Make sure the Recoil Spring is installed (under the
barrel). Placet the Slide Assembly over the Barrel and pull rear-
ward until it can be dropped down onto the Frame. Depress the
take down button into the Slide far enough to allow it to drop into
its slot. Release the take down button after Slide is pushed down
into the Frame. You should not be able to lift the rear of the Slide
away from the Frame if properly assembled.
After the assembly
is completed, but before loading, manually operate the pistol
to see that everything functions properly.
WARNING
PARTS ORDERING INSTRUCTIONS
Changes in design may occur from time to time, always specify
the color and serial number of your pistol with your order. Plus
$5.00 Shipping and Handling.
M
AIL CHECK OR MONEY ORDER PAYABLE TO:
JIMENEZ ARMS
5550 REFERENCE ST.
LAS VEGAS, NV 89122
[phone] or Toll Free [phone]
• C A U T I O N •
For your safety, and that of others, we strongly recommend
that you do not place a cartridge in the barrel until you are
ready to shoot.
RECOMMENDED AMMUNITION 22LR HIGH VELOCITY US MANUFACTURED.
WARNING
Ammunition used in this firearm contains lead. Use of this ammunition may expose you to
lead, a chemical know to the State of California to cause cancer, and reproductive harm.
Shooting full metal-jacket ammunition will greatly reduce your exposure to lead, always
wash your hands thoroughly after cleaning firearms or handling ammunition.
VERY IMPORTANT
THESE INSTRUCTIONS SHOULD BE CAREFULLY READ AND NOTED. 02/05
Barrel
Slide
Trigger
Magazine
Magazine Catch
Frame
Cocked
Indicator
Safety
(Shown in “FIRE” Position)
22077***
2
0322R-2
2
2255-2
20200-2
20311R-2
2
0166-2
2
2166-2
22622-2
22500
2
0122-2
2
0400-2
20366
2
2144
22333-2
2
299
20011-2
20033-2
22100
20044-2
22133
2
0322
2
0422-2
2
2266-2
2
288*
JIMENEZ ARMS ‘JA 22’
MANUFACTURED BY
MODEL J.A. 22
P
ART PRICE
XXXX FRAME (NOT AVAIL) -------
22077*** SLIDE $20.00
22144 EXTRACTOR $3.00
22333-2 EXTRACTOR SPRING $1.00
2
0322R-2 EXTRACTOR PIN $1.00
2288* TAKE DOWN BUTTON $4.00
22266-2 FIRING PIN SPRING $2.00
2299 FIRING PIN ASSY $4.00
22100 SEAR SPRING $2.00
2
2133 EJECTOR $3.00
20322 EJECTOR PIN $1.00
20044-2 CAM $3.00
20011-2 SAFETY $3.00
20033-2 SAFTEY SPRING $3.00
2
2255-2 RECOIL SPRING $3.00
22622-2 BLACK GRIPS PAIR $7.00
20200-2 GRIP SCREWS PAIR $1.00
2
2166-2 TRIGGER SUB-ASSEMBLY $8.00
20166-2 TRIGGER RETURN SPRING $1.00
20311R-2 TRIGGER CROSS PIN $2.00
20122-2 MAGAZINE CATCH $3.00
20400-2 MAG-CATCH SPRING $1.00
2
0366 CATCH/CAM PIN $1.00
22500 MAGAZINE ASSEMBLY $12.00
PLUS $5.00 SHIPPING & HANDLING
* specify finish
**with exchange only