Use and Care Manual

ORIGINAL
Laboratory:
Phone : [phone]
Regd. Office:
TÜV SÜD Certification and Testing
Fax : [phone]
TÜV SÜD Certification and Testing (China) Co., Ltd.
(China) Co.,Ltd.
www.tuv-sud.cn
Shanghai Branch Testing Center
Shanghai Branch Testing Center
No. 1999 Du Hui Road, Minhang District, Shanghai
Hardgoods Laboratory
201108 P.R. China
Page 10 of 10
Test Report No 70.452.19.12506.01
Dated 2019-11-01
Clause
Requirement
Result
Verdict
affecting the product's resistance.
Mechanical strength of the membrane of a swimming pool with tubular frame and/or flexible
structure
The membranes composing the structure of swimming pools shall meet the following requirements:
– Wall tear resistance according to EN 1875-3 and EN ISO 4674-2.
Acceptable results:
– warp direction: 10 DaN;
– weft direction: 5 DaN.
Warp direction
can withstand
11 DaN
Weft direction
can withstand
6 DaN.
– Wall/wall weld tensile/breaking strength according to EN ISO 1421
Acceptable results:
– warp direction: 100 DaN/50 mm;
– weft direction if applicable: 100 DaN/50 mm.
Warp
direction: can
withstand 100
DaN
Weft direction
can withstand
100 DaN
4.4
– Adhesion test according to EN ISO 2411
Acceptable results:
– warp direction: 9 DaN/50 mm;
– weft direction: 9 DaN/50 mm.
Warp direction
can withstand
10 DaN/50
mm
Weft direction
can withstand
10DaN/50 mm
P
Abbreviation: P = Pass; N/A = Not Applicable.
Appendix: Sample Information in detail
Item No.
Overall size
(diameter x
height)
(cm)
Maximum
water
depth
(cm)
Water
Capacity
(L)
Side Tube
size
(diameter x
thickness)
(mm)
Support Tube
size
(diameter x
thickness)
(mm)
The thickness of
the membrane
(mm)
#17792/17792*/
10201/10201*
240 x 63
50
2074
/
/
0.53
- End of Test Report -