User's Manual

Mode3: Sensor mode+Dim
Automatically turns off during the daytime and will turn on dim
light at night. When it senses people’s movement at night, the
light will turn on to brightness and turn to dim light after 30
second.
“-“ Mode: There are 5 modes to lower the brightness.
“+” Mode: There are 5 modes to brighten the brightness.
Installation
①
Press the button switch to turn on the light
②
Fix the pillar hinge into the wall
③
Place the screw hole of the lamp over pillar hinge
④
Put screw through the lamp and twist it into pillar hinge
⑤The installation is completed
Note
1.The internal light sensor ensures the movement sensor will
not activate during the day. When the ambient light becomes
dark the sensor will activate.
2.The product is equipped with an internal lithium battery,
please do not replace it by yourself, put it with household
garbage or place it near sources of heat. It should be taken to