User Manual
Table Of Contents
- Foreword
- 2. Instructions
- 3.Installation and connection
- 4.System Function Introduction
- 4.1 Switch machine
- 4.4 IPC settings
- 5 Mobile P2P access
- 6.Appendix
Operation Manual of Wireless NVR Kit
20
4.4.5 Camera upgrade
Function description: IPC camera program version upgrade.
Operation steps: In the IPC configuration interface, click the 【IPC Upgrade】 title to enter the camera upgrade interface,
place the IPC program to be upgraded in the root directory of the U disk, insert the U disk into the NVR host, and refresh
the U disk status on the device upgrade interface. Select the program that needs to be upgraded and click Upgrade. The
device will automatically restart after the upgrade. As shown below：
4.5 System settings
System settings main menu: general settings, preview settings, recording plan, recording backup, network configuration,
storage management, user management, alarm function, exception handling, restore default, upgrade system The interface
is shown below: