User Manual

Operation Manual of Wireless NVR Kit
18
Steps:
1、I Right-click the main interface of the system, select 【IPC Config】 in the pop-up right-click menu, and the image
setting interface opens by default;
2、The user adjusts the camera image parameters according to his needs, click【Apply】, and then click the 【OK】button
to save the user modified parameters. As shown below:
4.4.2 Preview settings
Function description: IPC equipment channel title switch, channel position, channel name, font size, time title switch,
time position, time automatic size setting.
Operation steps: On the IPC configuration interface. Click the
【
Live Set
】
title, click to enable or disable the channel
title, and the time title is displayed. Set the title position and font size. Click
【
Apply
】
and then click 【OK】 to save the
setting parameters. As shown below
：
4.4.3. Encoding settings
Function description: View the IPC device's primary and secondary stream coding, resolution, bit rate control mode, I
frame interval, stream value, frame rate and other information.
Operation steps: On the IPC configuration interface. Click the 【Encode Config】 heading to enter the encoding setting
interface. Currently, it only supports viewing encoding information and does not support customer-defined modification
functions. As shown below: