User Manual
Table Of Contents
- Foreword
- 2. Instructions
- 3.Installation and Connection
- 4.System Function Introduction
- 4.1 Switch Machine
- 4.4 IPC Settings
- 5 Mobile P2P Access
- 6.Appendix
Operation Manual of Wireless NVR Kit
34
the stored files; the backup is terminated midway, and files that have been copied to the storage device can be played
back independently.
【Play Ratio】 Display the speed multiple of fast or slow playback.
【Stop Playing】 Video recording stops playing.
4.7 PTZ Control (Reserved Function)
Function description: Use the NVR to control the camera pan/tilt rotation, zoom, preset position, cruise
and other operations.
Operation premise:
Before users control the IP camera or PTZ, please make sure that the camera supports PTZ control function
and the network with the NVR has been connected normally.
Steps:
1. Right-click on the main interface and select PTZ control in the shortcut menu to enter the PTZ control
interface. As shown below:
2. Support PTZ direction control, zoom, focus, iris adjustment, preset call, you can enter the sub-menu to
set the cruise path, run cruise.
Special Note: At present, this function is only reserved for NVR. The camera does not support the PTZ control function at
the moment. Cameras that support PTZ control will be launched later.
4.8 System Message
Function description: System information bar, you can view device log information, stream information, version
information, and online user query.
4.8.1 Log information