User Manual
Table Of Contents
- Foreword
- 2. Instructions
- 3.Installation and Connection
- 4.System Function Introduction
- 4.1 Switch Machine
- 4.4 IPC Settings
- 5 Mobile P2P Access
- 6.Appendix
Operation Manual of Wireless NVR Kit
29
Motion Detect：
【CAM】 Select the corresponding channel number to set the channel, and set all channels in a unified way.
【Period】 The device will trigger the motion detection alarm signal within the set time range
【Delay(s)】 When the video is lost, it means that when the alarm is over, the alarm will stop for an extended period of
time, ranging from 10 to 300 seconds;
【Show Message】 On the NVR preview screen, a dialog box for prompting alarm information will pop up;
【Buzzer】 When the alarm occurs, the device emits two long beeps.
【Record Channel】 Select the channel to set the motion detection area；
Humanoid recognition alarm：
【CAM】 Select the corresponding channel number to set the channel, and set all channels in a unified way.
【Period】 The device will trigger the motion detection alarm signal within the set time range
【Delay(s)】 When the video is lost, it means that when the alarm is over, the alarm will stop for an extended period of
time, ranging from 10 to 300 seconds;
【Show Message】 On the NVR preview screen, a dialog box for prompting alarm information will pop up;
【Buzzer】 When the alarm occurs, the device emits two long beeps.
【Record Channel】 Select the channel to set the motion detection area