User's Manual

ID: 1234
: Arm away
Act:OK
ID: 1234
: Arm stay
Act:OK
ID: 1234
: Disarm
Act:OK
Arm/disarm status check:
Reply format:
Method 2: By using application to send SMS.
App Setting Steps:
1) Add control panel
ķ Click “ ALARM SETTINGS ”
ĸ Click Create New Profile ”
Ĺ Enter the Profile Name, any character name can be input, this name will appear in the
panel list; Enter the alarm phone number, must be SIM number in the control panel;
Enter the User code, can be master or user or temporary code.
ĺ Set the function of . Function can select as below.
“
-12-
password0808status
Arm & disarm is not allowed when programming; when zone alarm, it will not arm,
meanwhile it will fail and return back.
Note
Ļ Click “ SAVE SETTINGS ”. Click “ SAVE SETTINGS ” to finish setting.
2) Choose profile
In control panel list, click control panel's name, then click “ Select ” button to enter the
main interface. If users need any change, please click “ Edit ”.
3) Operate control panel
Arm away Disarm
Arm Stay Will proceed the function set above.
Send SMS for Alarm / Arm / Disarm
-13-
Each time operates a button, it will send out a paid SMS. We suggest wait for 30 seconds
to proceed next operation after one operation.
Note
It enables the control panel to send SMS message
to the set phone number or SMS center for alarm,
or arm / disarm.For example,the control panel ID
is 1234, when zone 2 (Hall) fire alarm, it will send
SMS as following:
Users need to install Android or IOS APP correctly. Then operate the alarm system as to the
operation hints in the interface. Every operation will send a message to the panel.
ID:1234
ZONE: 002 hall
EVENT: FIRE ALARM
2017 - 02 - 01 17:12
STAT STAT STAT