User's Manual

-32-
Term Definitions
Detector: A facility that detects intrusion and abnormal state automatically via some electric
or physical methods and output switch signals or wireless signals to the system for disposal,
then output such as infrared detector, smoke detector, etc.
Zone: An area of the detection range of one or group of detectors.
Bypass: Close one of the zones temporarily, so that it cannot alarm while act in the zone.
Arm Away: The armed status while going out. All the zones without bypass are in ar
med
status.
Arm Stay: Alarm status while you are at home. All the zones are in armed status except
active zones.
Disarm: Close the entry/exit zones, active zones, perimeter zones. Other zones are still in
arm status.
24-Hour Zone: No matter armed or disarmed, it is in valid detecting status. It is usually used
in fire alarm, duress alarm and other emergent alarm which can be canceled only by
password holder.
Entry Delay: A period for user to enter detection area, activate the de
lay zone and disarm
before the system alarms. During the period, user can activate several specified zones
(entry zone) without alarm immediately. While exceeding the time, the system alarms if not
disarmed. Zones with entry delay are the exit/entry zone and active zone.
Exit Delay A period for user to leave detecting area once the system armed. Zones with exit
delay will alarm during this period. The zones with exit delay are the exit/entry zone and
the active zone.
Supplementary Entry D
elay The Supplementary Entry Delay is a pre-alarm feature that is
employed in the event that the system is not disarmed during the entry delay.
signals,
:
not
:
Duress Code: When user is forced to disarm the control panel by burglar, user inputs duress
password, the control panel is disarmed but sends alarm information to the center stations or
receiver. The duress password can be used to disarm but set parameters.
Chime Zone: During disarm, while the zone is triggered, the panel will sound “Ding Dong!”
-33-
Available with installer code
Available with master code
1. Stop. Comm.
4. Phone Set
6. Event Log
2. Zone Bypass
3. Code Set
5. Device Set
7. System Option
8. Aided Test
1. Bypass One By One
2. Bypass All
1. Voice Phone Set
2. SMS Phone Set
3. Panel ID
4. Comm. Option
1. Zone
2. Keyfobs
3. Siren
4. PGM
5. RFID Tag
1.Siren Test
2.Walk Test
3.Transmitter Test
4.GSM Test
5.SenD TEST SMS Interval
1. Set Date/Time
2. Auto Arm/Dis. Time
3. Volume
4. Supp.Ent.Delay
5. Window/Door Open Remind
6. Arm With Open Doors
7. Initialize All
#
#
#
#
#
Menu Structure