User's Manual

-30-
ƽ Power adaptor:Input100V240VAC50/60HZˈOutput12VDC1.5A
ƽ Backup battery capacity:
ƽ Working voltage: 12VDC
ƽ Static current:
ƽ AUX power output: AC10-12V, DC6-8V, İ100mA
ƽ Siren output: 400mA
ƽ PGM output max load: DC 25V/500mA
ƽ Built-in siren: 85dB
ƽ Working temperature: -10ഒaഒ
İ
Electric Parameters:
ƽ GSMworkingfrequency850/900/1800/1900MHz
ƽ
RX sensitivity:᧸-106dB
ƽ
GG
Current:Standby:᧸25P$RX:᧸P
$
GSMModule:
6: Parameters
Wirelesszones 32:
Wiredzones 2:
Wirelessfrequency 433MHz / 868MHz:
Detector / Magnetic contact / Keyfob wireless distance: ı100m (with no obstacle)
Sirenwireless distance: ı50m (with no obstacle)
General Parameters:
EOL resistance: 2K~2.4K
7.2V/800mAh
＜90mA@12V(not including wired detectors and GSM module)
-31-
7: Appendix
Although it is an advanced and reliable security system, it does not offer absolute
guaranteed protection against burglary, fire, or other troubles. The limitations are as
follows:
1. Intruders may get access to unprotected openings or have technical sophistication
to invalidate the system.
2. The system will disable without power.
3. Alarm warning devices such as bells may not alert people if they are installed in an
improper position. If the alarm bell is installed outside, there are less likely to waken or
alert people inside th
e bedrooms.
4. Unsuitable installation position of detectors. If smoke detector is installed in an
improper position, it is not easy for smoke to enter the detecting area. Because of
doors or walls, it is hard for the detector to detector fires in other rooms, e.g. the
detector in the first floor cannot sense fires in the second floor.
5. Lack of maintenance may lead to the system disabled. Weekly testing is necessary to
ensure the system work normally.
Warranty and Limitations