User's Manual

ManualsBrandsJiangxi Jade IOT-Sensing Technology ManualsElectronicsControl Panel

Same as wireless zones, pls refer to that.

Wireless Siren Register

-24-

-25-

Same as wireless zones, pls refer to that.

Clear Wireless Siren

Same as wireless zones, pls refer to that.

Activate/Mute Siren

It enables the siren (built-in siren, external wired siren or wireless siren) to be on or off.

Siren Cut-off

Siren cut-off is the period of time the sirens are activated after an alarm has occurred,

which can be set from 0 to 30 minutes.

Call Back When Arm/Disarm

With this function, the siren will beep when users arm or disarm to remind operation success.

Note

Using keyfob to operate the control panel. When arm-away, the built-in siren and wired siren will ring

3 times; when arm-stay, 2 times; when disarm, one sound.

1. Press “ / ” to select “ ON ” or “ OFF ”, press “ # ” .

2. Press “ * ” to quit when finished.

PGM

The PGM is a programmable output that is triggered according to specific system status

conditions. The Output Trigger option determines the conditions that activate and

deactivate the PGM output.

To trigger PGM output

1. Select “PGM”, press “#”.

PGM only compatible with low voltage(DC) control board. It shall not be connected with

city power(AC) directly.

Note

2. Press the navigation key to select one of Output trigger and press “ * ” to exit.

See following table:

To set PGM cut-off:

1. Select ಯPGM Cut-off ”, press ಯರ

2. Press ಯರtoeditwithiconindication

3. Enter a PGM cut-off time(0-300s, 000 means continuous activation until disarm)

4. Press ಯರtoexitwhenthedesiredsettingisdisplayed

PGM Trigger

Activated by……

Disactivated……

Zone 1 Alarm

Zone 2 Alarm

…… ……

……

Zone 15 Alarm

Zone 16 Alarm

Zone 17 Alarm

Zone 18 Alarm

Zone 19 Alarm

Zone 21 Alarm

Zone 22 Alarm

Zone 30 Alarm

Zone 31 Alarm

Zone 32 Alarm

Instant Trigger

See above

Disarm or PGM cut-off

Zone 46 Alarm

See above See above

……

Zone 45 Alarm

See above See above

Disarm

Siren follow

Instant Activate

Siren follower

Any arm status change

Siren follower

Entry/Exit Activate

Until disarm or after PGM cut-off

Active

See above

Perimeter

Panic

Fire

Tam pe r

Gas

Duress

Arm away

Arm Stay

Instant Activate

Any arm status change

With all conditions satisfied, PGM will output. The PGM under “arm away, arm stay, disarm or

siren follow ” is not determined by “ PGM cut-off ” time, while PGM under other situations will

switch to disactivated after PGM cut-off. The PGM cut-off can be set by programming.