User's Manual

To configure the system, or make any changes to the pre-set functions.
During disarm, press “ ” on keypad, Input master code or installer code to enter main
menu. Press the to select what users desire to set and confirm with “ # ”. or Press
“ to exit.
Quit Programming
Press “  ” to quit programming to previous menu. Or it will return to previous automatically
with no operation within 1 minute.
Programming Items
“ / ”
 ”
4: Menu System in Detail
Enter Programming
.
Code is available as 4-6 digits. If the code is set 5 or 6 digits, the last one cannot be 0. The
code must be different.
Master Code
The Master code is the highest user authorization level. It enables users to enter main
menu, which can be edited. With the Master code, users can edit all other user codes
except the installer code.
3. Code Set
Through this operation, all communication buffers are cleared and all pending messages
are canceled.
1. Stop. Comm.
Available with installer code
Available with master code
Default installer code: 1234
Default master code: 0808
User Account Naming
Each Code has a user account which can be named within 16 letters. Names can be given
either when first adding a code or by editing them later.
When the “Enter New Name” screen is displayed the numeric keyboard can be used to
enter text. Simply find the corresponding numeric key with the required character and
press repeatedly until the wanted character appears .Release the key and the cursor
automatically jumps to the next position for users to continue with the next char
acter by
the same method.
The keys have the following functions:
Installer Code
To set installer code: Same as Master code set.
Temp. Code
The temp. code is just for temporary use which is only valid for 24 hours. It will auto clear
and must be reset for next time. Or after initialization or re-power on, it will be cleared.
To edit/delete Temp. code
1. From the menu, select “Code set”, press “#”, select “Temp. code”, press “#”.
2. If any temp. code is set before, it will display with “  ”, press “#” to edit; If not, the icon
flashes on LCD.
Once the name is added, it can be edited but not deleted. If really needed, please delete
by initialization.
Note:
Note: The default installer code is 1234, which is strongly recommended to edit after installation.
1 # / .
2 abc
3 def
4 ghi
5 jkl
6 mno
7 pqrs
8 tuv
9 wxyz
0 <space>
* Back
 Enter
Note : The default master code is 0808, which is strongly recommended to change after installation.
To set master code
1. From the menu, select “ Code set ” , pres , select “ Master code ”, press “ # ”.
2. Press “ # ” to edit, Input the new master code ending with “ # ”.
3. The LCD will remind if it is edited or not. Press t. “ # ” to confirm. Or “  ” to qui
s “ # ”
-18- -19-
2. Zone Bypass
When a zone is bypassed, it is ignored by the system and does not generate an alarm when
triggered. It enables users bypass one zone or more zones, or all zones.
To bypass one by one
1. Select “ Bypass one by one ”, press “ # ”.
2. Press “ / ” to select the zone number, ending with “ # ”.
3. And then select “ ON ” or “ OFF ”, ending with “ # ”.
4. Press “ * ” to quit.
To bypass all
Select “ Bypass All ”, press “ # ”.
It will remind “ Bypass All ”, press “ # ” to confirm, or press “ * ” to give up
The Installer code grants access to the “ Aided Test ” menu.