Specifications

文档编号：
14
7.4 Reliability performance
The service life of vehicle terminal shall not be less than 3,000 hours.
8 Installation method
8.1 Product installation steps
1）Paste the terminal on the selected installation position with 3M glue;
2）Fix M6/4 screws on the mounting holes respectively to ensure stability and
firmness;
3）Ensure that the terminal housing and label are in good condition during
installation.
8.2 Product installation sequence
1）First select the specific installation position of the terminal, paste 3M glue on
the back of the terminal (one side of grid texture) (ensure firm pasting), tear off the
3M glue red protective paper, and then paste the front of the terminal (the label
surface) upward or outward on the selected installation position;
2）Fix 4 M6 screws on the mounting hole with socket wrench or cross screwdriver
to ensure the stability and firmness of the terminal;
3）Connect the terminal connector with the terminal harness connector of the
whole vehicle;
4）Finally, connect the GPS antenna and GSM antenna to the terminal.
8.3 Precautions for product installation
1）The installation surface shall be smooth without oil stain and dust;
2） Ensure that the terminal housing and label are in good condition during
installation.