文档编号： Vehicle Terminal——WL-TBOX4 Hardware Specification File status: Current [ ] Draft version: [ ] Official release Document [√] Changing classification: V1.
文档编号： Revision History Version Revision date Reason and change description V1.0 2021.9.9 New-built V1.1 2021.11.22 Reviser Revised after review 1 Product Introduction The product described in this document is the vehical terminal with model WL-TOX4.
文档编号： GB 17691-2018 emission limits and measurement methods of pollutants from heavy duty diesel vehicles (China phase VI) GB20891-2014 emission of exhaust pollutants from diesel engines for non road mobile machinery HJ 1014-2020 technical requirements for pollutant emission control of non road diesel mobile machinery ISO16750-1 - road vehicles - environmental conditions and tests for electrical and electronic device - Part 1: General Iso-16750-2 road vehicles - environmental conditions and tests for elect
文档编号： SAE J1939/71 commercial vehicle control system LAN CAN communication protocol Part 71: Vehicle application layer SAE J1939/73 commercial vehicle control system LAN CAN communication protocol Part 73: Diagnostic application layer GB/T 28046.1 environmental conditions and tests for electrical and electronic device of road vehicles Part 1: General Provisions GB/T 28046.2 environmental conditions and tests for electrical and electronic device of road vehicles Part 2: Electrical loads GB/T 28046.
文档编号： Storage temperature: -40℃ ～+85℃ 3.2 Climate environment Relative humidity: 25%～75% Atmospheric pressure: 86kPa～106kPa 3.3 Power supply Operating voltage range: 9V DC ～ 36V DC Average operating current: <100mA@12V DC <50mA@24V DC Peak current: ＜500mA Quiescent current: ≤2mA 3.4 Housing protection class Meets IP67 4 Appearance and structural dimensions 4.
文档编号： 4.2 Structure Size (L)101.5*(W)102.5*(H)35.2mm 4.3 Quality Not exceeding 500g 5 Hardware interface 5.1 Interface TBOX4 terminal interface model can be customized according to requirements, such as 6PIN, 8PIN and 12PIN.
文档编号： 6 Function introduction 6.1 Self-checking When the vehicle terminal starts working after being powered on, it indicates the current main states through signal light, display screen or sound. The main states include: whether the communication is normal, whether the positioning is normal, and whether the power supply system of the vehicle terminal is normal. 6.2 Time and date The vehicle terminal can provide time and date.
文档编号： 6.5 Enterprise standard data transmission The vehicle terminal collects data according to the requirements of the enterprise standard and uploads it to the enterprise platform. The transmission time interval and data type of real-time data meet the relevant technical requirements. 6.6 Storage function of vehicle terminal information data The internal storage medium capacity of the vehicle terminal shall meet the internal data storage for at least 7 days.
文档编号： 6.10 Positioning function The vehicle terminal can provide the positioning information specified in GB/T 32960.3. Accuracy requirements: a) Horizontal positioning accuracy is less than 5m; b) Positioning time; 1) Cold start: the time from system power on to capture shall not exceed 120s; 2) Hot start: the capture time should be less than 10s. c) Minimum position update rate: 1Hz. 6.
文档编号： and connects with the vehicle CAN bus to receive and send data flow. 6.13 Program upgrade The vehicle terminal supports local program upgrade and OTA remote upgrade. 6.14 Security policy The vehicle terminal provides technically feasible safety strategies to ensure that various performances and functions of the product are within the safe range.
文档编号： 2）Send heartbeat to the machine regularly when the connection is normal. In case of disconnection failure or removal of the anti-dismantling wire, send the removal alarm to the machinery, and send the removal alarm information to the management platform as far as possible according to the requirements of table H.2 and H.10. The alarm information includes the removal status, removal time and positioning longitude and latitude information.
文档编号： 7.1.3 Overvoltage performance The overvoltage performance of vehicle terminal shall meet the requirements of 4.3 in ISO 16750-2:2010. 7.1.4 Power supply voltage test at startup When the vehicle terminal is started, the power performance shall meet the requirements of 4.6.3 in ISO 16750-2:2010. 7.1.5 Reverse voltage performance The reverse voltage performance of vehicle terminal shall meet the requirements of case 2 in 4.7 of ISO 16750-2:2010. 7.2 Environmental suitability 7.2.
文档编号： 7.2.4 Resistance to Mechanical Shock The mechanical impact resistance of vehicle terminal shall comply with GBT28046 according to the installation position of vehicle terminal 3-2011. 7.2.5 Housing protection performance The housing protection of vehicle terminal shall comply with GBT 4208, and the housing protection grade shall be IP67. After the risk test, all functions of vehicle final drive shall be in class A defined in GB/T 28046.1-2011. 7.2.
文档编号： 7.2.10 Temperature cycle The temperature cycle performance of vehicle terminal shall meet the requirements of 5.3.1 in ISO 16750-4:2010. 7.3 EMC performance 7.3.1 Electrical transient conduction immunity along power line The severity of electrical transient conducted immunity test pulse along the power line shall meet the requirements of class III in table A1 or table A2 of GB/T 21437.2-2008. The test shall be conducted according to 5.2.3.
文档编号： 7.4 Reliability performance The service life of vehicle terminal shall not be less than 3,000 hours. 8 Installation method 8.1 Product installation steps 1）Paste the terminal on the selected installation position with 3M glue; 2）Fix M6/4 screws on the mounting holes respectively to ensure stability and firmness; 3）Ensure that the terminal housing and label are in good condition during installation. 8.
文档编号： 8.4 Antenna installation and precautions 1）Before installing the antenna, wipe the installation surface clean without dust. It is best to install it on the surface of iron plate, which can be absorbed.
： FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
