Specifications

TEL:[phone]
1、Turn on the sensor power, open the computer software, click on the software
Bluetooth scanning function , select the corresponding sensor to connect;
2、After connecting the red and black alligator clips to the sensor, parallel the
sensors to the circuit;
3、Click to start the collection and record the data;
4、Click to stop collection.
⚫ The sensor needs to be calibrated before use. Short the red and black
alligator clips and click the calibration button on the software to calibrate
the sensor.
❖ Online collection
⚫ The regular way is continuous online collection. After the device is
connected with the terminal, data can be collected online.
⚫ The device priority is continuous collection. Offline acquisition is not
started as long as online acquisition is in progress.
Equipment use
Calibration
Data Collection