Niu Technologies Kick Scooter KQi3 Series Product Instruction Manual
Contents 1. Riding Safety 2. Packing list 3. Parts info 4. Dashboard Info 5. Installation guide 6. Downloading the APP 7. ARE YOU READY 8. Warnings 9. Troubleshooting 10. Maintenance and Care 11.
1 1. 2. 3. 4. 5. 6. 7. 8. Riding Safety scooter. Please read this manual carefully to better understand the product before riding. Please read the important safety precautions in this manual carefully and always abide by local laws and regulations when riding. IMPORTANT! Read carefully and keep for future reference Please read the product manual carefully, and ride carefully before you understand the characteristics of the kick scooter.. This kick scooter is a transportation and recreational tool.
9. Check the basic condition of the kick scooter before each ride. Discontinue use and don’t ride forcibly if you find such situations influencing driving safety that parts are loose, the parts are damaged, the battery life significantly decreases, the tires are flat or excessively worn and the scooter has abnormal noises or alarms. 10. Please properly keep your product packaging in case you need to return or repair in the future.
2 Packing list Extension nozzle M5 screw ×5 *One spare Power adapter 3mm socket head wrench
3 Parts info Accelerator Headlight Front reflector Folding wrench Instrument Bell Brake lever Side reflector Wheel hub motor Charging port Folding buckle Disc brake calipers Battery compartment Kickstand KQi3 Sport excludes the left hand brake and rear brake The picture above takes KQi3 Pro as an example
4 1. 2. 3. 4. 5. 6. 7. 8. 9. Dashboard Info Bluetooth status Abnormal temperature warning Lighting status Fault warning Real-time speed/fault code display Battery indication Pedestrian mode status Short press *5 to get into the pedestrian mode,the speed will be limited to 6KM/H, Short press the button to exit this mode Riding mode E-SAVE lights up: Eco mode E-SAVE goes out: Sport mode E-SAVE flashes: Custom mode (in-app).
5 Installation guide Body assembly 1. Secure the scooter neck tube and open the kickstand. 2. Connect the handlebar to the main line connector of the vertical tube, and install the handlebar to the vertical tube. 3. 4. Confirm that the device will power on and off after assembly. Lock the screws on both sides alternately with the hexagon wrench in the packaging box (tightening torque: 4~5N*m), that is, the assembly is completed.
Do not charge or continue using the battery if the battery is damaged or flooded. Fasten the rubber plug of the charging port before or after charging. Do not charge outdoors. Do not ride while charging. Parking instructions Please turn on the parking device after use and park the vehicle. Please turn on the parking device before use.
6 Downloading the APP Scan the QR code on the left, install the Niu E-scooter App, bind and activate the scooter according to the prompts. Safety risks are present when using the scooter. You must complete the teaching guide for newbies through the APP before initial use. For your safety, the new scooter is inactive and will be locked in the E-save position until you complete all the teaching contents for newbies.
7 ARE YOU READY? The risk of fall injuries is present during practice, so please wear a helmet and protectors all the way. 1 Turn on the power and check the power indicator. 2 Stand on the pedal with one foot and push back with the other foot. 3 When the kick scooter is sliding, stand on the pedal with the other foot, keep both feet stable, while gently pressing the throttle twistgrip.
8 Warnings It is forbidden to drive into public roads, motorways or highways. Please avoid riding in the rain. Braking distance will be extended in wet weather, so drive carefully. It is forbidden to drive if water level exceeds 2cm. It is forbidden for multiple people to drive a scooter or to drive with children in arms. It is forbidden to step on the back of the mudguard. Do not ride with one foot on the pedal or on the ground. Please always wear shoes.
adapt your trajectory and speed to those of a pedestrian before crossing these obstacles. It is also recommended to get out of the vehicle when these obstacles become dangerous due to their shape, height or slippage. WARNING! Keep plastic covering away from children to avoid suffocation. Get closer to your seller so he can refer you to an appropriate training organization. Avoid high traffic or overcrowded areas.
9 Troubleshooting Troubleshooting of the whole vehicle
10 Maintenance and Care Vehicle cleaning Wipe the main frame with a soft wet cloth. If buildup is formed and is hard to be cleaned, you can apply toothpaste and rub with a toothbrush repeatedly, and then remove residue with a soft wet cloth. Do not clean your scooter with alcohol, gasoline, kerosene or other corrosive and volatile solvents. These substances may damage the appearance and internal structure of the vehicle body. Do not spray the scooter with pressure water guns or water pipes.
It is strictly forbidden to immerse the battery and the vehicle body in water or ride in the rain, as well as cleaning the vehicle body with high-pressure water pipes in order to prevent water entering the battery compartment, circuit chip, etc. Do not take the battery out. The operation of the vehicle body may be affected due to wrong disassembly. Do not hesitate to contact your dealer or send an email to the following mailbox. Technical & general support: technical@niu.
Disc brake debugging Excessive braking force If you feel that the brake is too tight, use a wrench to loosen the brake arm nut 1 counterclockwise, return the brake cable to shorten the length of the exposed tail, and lock the nut clockwise 1 to confirm the brake force and complete the adjustment.
Use of the extension nozzle If your kick scooter front and rear tires are underinflated, please use the extension nozzle to connect the car body tires to inflate. First remove the front and rear tire inflatable nozzle cap, and then tighten the extended inflatable nozzle and tire inflatable nozzle,and connect the pump to inflate after they are to be tightened.
11 Specifications Item KQi3 Pro 46.2X21.3X47.3in ( 1,173X542X1,202mm) Product weight Before folding: Length × width × height After folding: Length × width × height Net weight Riding request Maximum load 220lbs(100kg) Age range 14+ years old Height 3’11”~6’6”(120-200cm) Product size Vehicle parameters Maximum vehicle speed 1 Average battery life Maximum Slope 2 Applicable terrain 1 KQi3 Sport 46.2X21.3X20.7in (1,173X542X525mm) Approx.(44.8lbs)20.3kg Approx.(40.6lbs) 18.4kg Approx. 19.
Battery pack parameters Motor parameters Charger parameters Tire parameters A-weighted emission sound pressure level IP rating 50dB Rated voltage 46.8VDC Rated capacity 486.7Wh Charging voltage 54.6VDC Charging temperature 32~113℉（0~45℃） Battery management system Rated power Input voltage 7th NIU Energy™ smart power tech Rated output 53.5V ⎓2A Output power 108W Charging time Approx. 6h Tire technical specifications Recommended tire pressure 9.5"X2.5" IP54 350W 100-240V~2.
Manufacturer: Jiangsu Niu Electric Technology Co., Ltd. Importer: BESENDER INC Address: 5199 Brooks st. Suite G Montclair CA 91763 Contact Technical & general support: technical@niu.com Warranty claims: warranty@niu.com Keep your KickScooter serial number on hand when contacting us. You can find your serial number on the side of your KickScooter or on the page [manage] in the Niu E-scooter App.
Certifications For model: KQi3 Pro,KQi3 Sport Federal Communications Commission (FCC) Compliance Statement for USA This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
