Wiring Diagram

Jiangsu JWT Electronics Shares CO.,Ltd.
32 / 42
3、fw_term_tx=0 (RX)
When Reg0x01[2]= 0, the chip will start receiving the package at Reg0x00[14] when it is written
as 1 (RX EN= 1), and the chip will automatically set the RX to the fixed channel. After waiting for
some time to stabilize the internal clock and the RX circuit, the chip began to look for syncword in
the received signal, and once found, it would pull the PKT FLAG and write the received data to
FIFO. The PKT FLAG will always be high until the MCU reads the data in FIFO. When the MCU
reads the data, the PKT FLAG will pull down until the next TX/RX cycle.
When Reg0x01[2:1]= 'b00 or' b01, the Reg0x00[14] must be written to 0 to exit the RX state.
Picture 13-8
Picture 13-9