Wiring Diagram

Jiangsu JWT Electronics Shares CO.,Ltd.
27 / 42
2、Receive sequence
The RX reception sequence is shown below. When MCU writes register 0x00[14] to 1 and
selects a good receiver channel, the chip will open RX and wait for the correct syncword. When
the correct syncword is received, the chip will automatically start processing the packets. When
the packet is processed, the state machine will enter IDLE.
When received packets longer than 63 bytes, FIFO flag will work, meaning that the MCU must
read data from FIFO.
In weak signals, multipath and long distance, you may not receive the correct syncword. To
avoid a crash, MCU needs to do a timer. In most applications, packets are received within a certain
time window, and if the system is not received, the timer returns to normal mode.
Picture 13-4