User's Manual

Tally Dascom 2600/2610/PRN-7

6 Web Panel and Internal Ethernet Interface

6.1 Summary

6.1.1 Introduction

It is assumed you have the following:

䕺 A working knowledge of your network system and related utilities.

䕺 Access to the supervisor or administrator account as a network administrator.

6.1.2 Supported Environments

The built-in network interface supports the following platforms and protocols:

䕺 Microsoft® Windows® NT 4.0, 2000, XP,7,8, Server 2003/2008/2012

䕺 Linux – Red Hat®, SuSE®

䕺 Unix® – Sun Solaris®, HP-UX®, IBM AIX®

䕺 TCP/IP, HTTP, LPR/LPD

6.1.3 Network Interface and Cabling

The printer requires:

䕺 Ethernet 10Base-TX or 100Base-TX interface.

䕺 Category 5e or 6 Ethernet cable with RJ-45 socket connectors.

6.1.4 Connecting the Printer

Connect the Ethernet cable to the network interface port RJ-45 connector on the rear

center

of the printer.

6.1.5 Network Interface Status

There are two status lights (LEDs) next to the RJ-45 connector on the rear panel.

䕺 Right green light (Link Status) is solid: This shows the printer is connected to the

network.

䕺 Right green light is blinking: Shows network activity.

䕺 Left yellow light (Duplex Status) is solid: Shows network interface is in full duplex

mode.

Unless the link status light is green, the printer will not be able to connect to

the

Network.