User's Manual

Tally Dascom 2600/2610/PRN-7
Pap.back
Pap.back=normal
Pap.back=dark
Pap.back=normal is the standard for
normal paper.
Pap.back=dark can be set to process
paper with a grey back.
Paper with a completely black back
side cannot be used if the ink is
carbon-based. However, the printer
can handle aniline- based black paper
(undefined colors).
Hvy Form
HvyForm=ON
Hv
yForm=OFF
If you set HvyForm=ON, the printer
prints the same line twice at double
strike. This setting ensures that copy
paper produces optimum results.
SerialN
factory set
With the SerialN function you have
the possibility to change the 12 digit
serial number of the printer. The
number can be written with any ASCII
character between hex 20 and hex 7E.
LED Panel: The Serial Number cannot
be set via menu instead you need to
use the WebPanel.
AssetN
10 digits empty
With the AssetN function you have
the possibility to change the 10 digit
asset number of the printer. The
number can be written with any ASCII
character between hex 20 and hex 7E.
LED Panel: The Asset Number cannot
be set via menu instead you need to
use the WebPanel.
GrSpeed
GrSpeed=Normal
G
r
Speed=High
This parameter allows improved
Graphic Speed independently to the
driver. It affects only the print speed
of graphic printouts at 180 x 180 dpi.
Jobcntl
Jobcntl=On
Jobcntl=Off
This parameter activates the printer
language PJL (Printer Job Language)
in
connection with the internal Ethernet
interface (ETH-INT) or the external
TallyCom III interface (ETH-EXT).
UltraDr
UltraDr=on
UltraDr=off
Ultra Draft=on, speeds up 17.1 and 20
cpi. Precondition is HS-Draft needs to
be activated.
46