User's Manual

Tally Dascom 2600/2610/PRN-7
carriage goes rightmost to Pagewid
Position
This function is ON by default and is
valid for Rear Tractor only.
Pagewid
2610: 20ü136 /10”
2600/PRN-7:20ü80 /10”
Parameter “Pagewid”. This item’s full
name is Pagewidth.
It is located beneath the already
existing menu item “Paphand” (Paper
Handling).
This setting tells the printer logic the
width of the installed paper and is
valid for all paper ways.
By default this parameter is maximum
width.
2600/PRN-7: 80 Characters (80/10”)
2610: 136 Characters (136/10”)
The value can be changed in 1/10” in a
range between 20 and 136 (80).
Widthcon
Off
On
Parameter “Widthcon”. This item’s full
name is Width Control.
It is located beneath the already
existing menu item “Paphand” (Paper
Handling).
This setting enables (on) / disables
(off) the possibility to define the
position of the carriage during
loading
& ejecting paper.
If Off ฀
2600/PRN-7:the carriage’s position is
4”
2610: the carriage’s position is 5.3”
If On ฀
2600/2610/PRN-7:Half of Value defined
in Pagewid
This function is OFF by default and is
valid for all paper ways.
CX-bid
CX-bid=ON
CX-bid=OFF
CX-bid=ON sets the parallel interface
of the printer to bidirectional mode
(IEEE 1284, Nibble mode), e.g. for
Windows Plug & Play.
CX-bid=OFF sets the interface to
compatibility mode in order to ensure
reliable operation with special
external boxes.
Wrap
Wrap=On
Wrap=Off
Wrap=On: If more characters than can
be printed are transmitted per line,
the characters which cannot be
printed on this line are printed at the
44