User's Manual

Tally Dascom 2600/2610/PRN-7
Tear=1s/3s/6s
Tear at TOF
last printed text is visible. As soon as
data is received the paper moves to
the “normal” print position. After
printing the printer waits for the given
interval to bring the paper once more
to the auto view position.
The paper is in the tear off position
when auto tear is switched on, the
perforation of the positioned at the
tear off edge of the printer. If data is
received, the paper returns to the
normal print position. After printing,
the printer waits for the given interval
to bring the paper once more to the
tear off position. If the tear off edge
does is not aligned with the
perforation of the paper then this can
be corrected.
Width
Width=13.6Inch
Width=8Inch
Width=13.2Inch
Selects the line length in inches. With
the setting of 8 Inch, the printer
operates like a printer with a width of
only 8 inches.
Eject
Eject=Top
Eject=Front
This is valid for single sheet mode
only. It controls the exit direction of
the friction sheet paper.
Barcode
Off On
With this function selected it is
possible to print different barcodes
and LCP (Large Character Printing).
Barmode
Unsecured
Secured
Allows printing of normal characters
on the left and right of the barcode.
FFmode
Off On
Specifies whether a form feed is to be
performed when the pap
er reaches the
top print line.
LeftMrg
Wide: LeftMrg=0 - 134/10”
Narrow: LeftMrg=0 - 78/10”
The left print margin can be set to a
fixed value.
RightMrg
Wide: RightMrg=2 - 136/10”
Narrow: RightMrg=2 - 80/10”
The right print margin can be set to a
fixed value.
42