User's Manual

Tally Dascom 2600/2610/PRN-7
access the Online/Offline, Load/Park,
Pape
r and Paper Feed (LineFeed/Form
Feed, / ) functions in Online and Offline
mode while Setup mode is disabled.
In this case, the Setup menu can only
be called up by holding the key Setup
while switching on the printer.
Languag
e
English German French Italian
Spanish Turkish
The menu can be shown in six
languages.
Paper
Single TrFront TrRear PullTr
Selects the paper parameters Formlen
(form length), FormAdj (first printing
position/TOF) separately for each
paper source in the current menu.
Formlen
Lines
=6 – 132
Default 6LPI = 66
Single:3ü22 inches
TrFrontǃTrRear ǃ
PullTr˖1ü22 inches
Sets the form length via line formats.
Please note that the adjustment in
Lines depends on the selected LPI. For
example 8 LPI at a selected line
number of 96 lines results in a form
length of 12 inches
(96lines/[8lines/inch]) = 12 inches. The
selectable range is between 3 and 21
inches, i.e. for 2 LPI from 6 to 42 lines
and for 12 LPI from 24 to 262 lines.
If the form length is set it will not be
changed by changing the LPI later on.
Standard
No format
DIN A3 (420 mm)
DIN A4 (297 mm)
DIN A5 (210 mm)
DIN B5 (250 mm)
DIN B6 (176 mm)
DIN C6 (162 mm)
Executive 10.5"
Letter 11"
Fanfold 12”
Legal 14"
Selects the form length by standard
formats. Using Standard, different
pa
per formats can be selected directly,
e.g. DIN A4, Legal, Letter.
The Menu indicates No format if a
value is selected by the Line function
or ESC sequences, which does not
correspond to a standard format.
FormAdj
FormAdj=0 -220/72”
Default 12/72”
Sets the first print position of a form in
n/72 inch, separately adjustable for
each paper path.
Autotear
ViewTear =Off
View=1s/3s/6s
The auto tear function or the auto view
function can be selected as desired.
When auto view is switched on, the
41