User's Manual

Tally Dascom 2600/2610/PRN-7
Buffer
Buffer=0 KB
Buffer=32 KB
Buffer=64 KB
Buffer=96 KB
Buffer=128 KB
Buffer=160KB
Buffer=192KB
Buffer=224KB
Buffer=256KB
Selects the size of the interface buffer.
ETH-INT
IP-Addr
Octets 1-4
0 to 255
Input of the IP address of the printer
This menu level offers the possibility
to set the IP address, which is divided
into four digit groups (octet 1 to 4).
Gateway
Octets 1-4
0 to 255
Input of the Gateway address of the
printer.
Subnet
Octets 1-4
0 to 255
Input of the Subnet mask address of
the printer.
IP Get M
DHCP BOOTP
Static
Selects the way of administrating the
IP address.
Banner
Off On
Specifies whether a banner page is to
be printed out, when using the
LPD/LPR protocol.
EthSpeed
Auto
-Sense
The transmission speed is detected
automatically.
10Mbit Half
Sets the transmission speed to 10 MBit
half duplex per second.
10Mbit Full
Sets the transmission speed to 10 MBit
full duplex per second.
100Mbit Half
Sets the transmission speed to 100
MBit half duplex per second.
100Mbit Full
Sets the transmission speed to 100
MBit full duplex per second.
CG-Tab
Graphic DLL Italic
Only available for Epson
LQ-2550/LQ-
2170 emulation. Either the
Epson character set Italics or the IBM
graphics character set or a DLL
(download) character set, as defined
before, can be activated in the code
range from hex. A0 to hex. FE.
CharSet
Extended Standard
Selects the IBM standard characters or
the extended IBM characters.
Country
E-USASCII
E-France
E-German
Selects the national character set.
39