User's Manual

Tally Dascom 2600/2610/PRN-7
Baud=4800
Format
8Bit No 1Stop
8Bit No 2Stop
8Bit Even 1Stop
8Bit Odd 1Stop
8Bit Mark 1Stop
8Bit Spc 1Stop
7Bit No 2Stop
7Bit Even 1Stop
7Bit Odd 1Stop
7Bit Odd 2Stop
7Bit Mark 1Stop
7Bit Spc 1Stop
7Bit Mark 2Stop
7Bit Spc 2Stop
This parameter serves to define the
number of data bits, the parity check
for received data bytes and the
number of stop bits per data byte.
Protoco
l
XON/XOFF
Robust-
XON/XOFF
ENQ/STX
ETX/ACK
ACK/NAK
This parameter serves to select the
type of protocol, i.e. a certain set of
rules and procedures for ensuring
error-free data exchanges between
computer and printer.
DTR
DTR=DTR
DTR=Ready
Defines the conductor to which the
DTR signal is connected
(DTR=Data Terminal Ready).
Interf.
Interf.=Share
Interf.=Parallel
Interf.=Serial
Selects the interface. Printer is
configured either for parallel. Ether
net
or optional serial connection or in
automatic change for the parallel or
the optional serial interface (Shared).
38