User's Manual

Tally Dascom 2600/2610/PRN-7
Prestige NLQ
Prestige LQ
Script NLQ
Script LQ
OCR-B NLQ
OCR-B LQ
OCR-A NLQ
OCR-A LQ
Orator NLQ
Courier I NLQ
Courier I LQ Orator LQ
Souvenir
NLQ
Courier I PS
NLQ
Gothic NLQ
Souvenir LQ
Courier I PS LQ
Gothic LQ
CPI
10 CPI, 12 CPI, 15 CPI, 17.1 CPI, 20 CPI,
5 CPI, 6 CPI, 7.5 CPI, 8.6 CPI.
Sets the characters per inch (character
pitch). The higher parameter the
smaller character spacing.
LPI
6 LPI, 8 LPI, 12 LPI, 2 LPI, 3 LPI, 4 LPI.
Sets the lines per inch (line density).
The higher parameter the smaller line
spacing (random LPI can be selected
via the ESC sequences).
Skip
Skip=0.0 Inch,
Skip=0.5 Inch, Skip=1.0 Inch,
Skip=1.5 Inch, Skip=2.0 Inch,
Skip=2.5 Inch, Skip=3.0 Inch,
Skip=3.5 Inch.
Skips the perforation; 7 different
values (in inches) can be defined.
ESCChar
ESC ESC+$$
Selects the start signal for control
sequences. Setting ESC: Only
character Escape can be used. Setting
ESC+$$: Character Escape or
alternatively two $ characters ($$) can
be used.
Emulate
Epson LQ-2550
Epson LQ-2170
IBM Propr. XL24
IBM ProXL24+AGM MTPL
Selects the emulation. When a printer
understands the control set written for
another printer type, it is said to
emulate the other printer.
Bidir
Bidir=On Bidir=Off
Setting On: Printer prints in both
directions (bidirectional).
Setting Off: Printer prints only in one
direction (from left to right).
I/O
Serial
Baud
Baud=9600
Baud=9200
Baud=600
Baud=1200
Baud=2400
Selects the data transmission rate
(baud rate) (baud=bit per second).
37